View EC3A01B_659085.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Ordering number : ENN6612B
EC3A01B
N-Channel Silicon Junction FET
EC3A01B
Features
* * * * *
Electret Condenser Microphone Applications
Ultrasmall (1006 size), thin (0.5mm) leadless package. Especially suited for use in electret condenser microphone for audio equipments and telephones. Excellent voltage characteristics. Excellent transient characteristics. Adoption of FBET process.
Specifications
Absolute Maximum Ratings at Ta=25C
Parameter Gate-to-Drain Voltage Gate Current Drain Current Allowable Power Dissipation Junction Temperature Storage Temperature Symbol VGDO IG ID PD Tj Tstg Conditions Ratings --20 10 1 100 150 --55 to +150 Unit V mA mA mW C C
Electrical Characteristics at Ta=25C
Parameter Gate-to-Drain Breakdown Voltage Cutoff Voltage Drain Current Forward Transfer Admittance Input Capacitance Reverse Transfer Capacitance Symbol V(BR)GDO VGS(off) IDSS yfs Ciss Crss Conditions IG=--100A VDS=5V, ID=1A VDS=5V, VGS=0 VDS=5V, VGS=0, f=1kHz VDS=5V, VGS=0, f=1MHz VDS=5V, VGS=0, f=1MHz Ratings min --20 -0.2 140 0.5 1.2 3.5 0.65 --0.6 --1.2 350 typ max Unit V V A mS pF pF
*The EC3A01B is classified by IDSS as follows.(unit : A) Rank IDSS V4A 140 to 240 V5A 210 to 350
Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
13105GB TS IM / 42503 TS IM TA-100435 / 13001 TS IM TA-3160 No.6612-1/5
EC3A01B
[Ta=25C, VCC=4.5V, RL=1k, Cin=15pF, See Specified Test Circuit]
Parameter Voltage Gain Reduced Voltage Characteristics Frequency Characteristics Input Impedance Output Impedance Total Harmonic Distortion Output Noise Voltage Symbol GV GVV Gvf ZIN ZO THD VNO Conditions f=1kHz, VIN=10mV f=1kHz, VIN=10mV, VCC=4.51.5V f=1kHz to 110kHz f=1kHz f=1kHz f=1kHz, VIN=30mV VIN=0, A Curve 25 1000 1.2 --110 Ratings min typ --3.0 --1.2 --3.5 --1.0 max Unit dB dB dB M % dB
Package Dimensions
unit : mm 2188A
Bottom View 0.5 1
0.25
Top View
0.05
0.05
1
0.65 1.0
0.4
0.05
Marking 2 3
0.15 0.2 0.35
0.05
0.15
0.25
3
2
1 : Drain 2 : Source 3 : Gate SANYO : ECSP1006-3
0.6
Type No. Indication (Top view)
0.5
Electrical Connection (Top view)
Polarity mark (On the top) Drain Gate Source *Electrodes : On the bottom
V
Drain Source
Polarity mark Gate
Switching Time Test Circuit
Voltage Gain Frequency Characteristics Distortion Reduced Voltage Characteristics 15pF
1k
VCC=4.5V VCC=1.5V
33F +
VTVM V THD OSC
BA 1k
Output Impedance
No.6612-2/5
EC3A01B
500
ID -- VDS
500
ID -- VDS
400
400
Drain Current, ID -- A
300
Drain Current, ID -- A
VGS=0
300
VGS=0
200
200
--0.1V
--0.2V
--0.1V
100
100
--0.2V
0 0 1 2 3 4 5 6
--0.3V --0.4V
7 8
--0.5V
0 9 10 0 1 2 3 IT02310 400
--0.3V --0.4V
4
--0.5V
5 IT03015
Drain-to-Source Voltage, VDS -- V
500
ID -- VGS
Drain-to-Source Voltage, VDS -- V
ID -- VGS
VDS=5V
VDS=5V
400
320
Drain Current, ID -- A
Drain Current, ID -- A
300
240
200
0 --0.7
--0.6
--0.5
--0.4
--0.3
--0.2
--0.1
0
0 --1.0
--0.9
--0.8
--0.7
--0.6
--0.5
--0.4
--0.3
--2
--0.2 --0.1
15
5 C
100
A 0
80
Ta =
2
75
C
ID
5 =3 S S
160
A 50
25 C
0
A
0
Gate-to-Source Voltage, VGS -- V
1.3
yfs -- IDSS
IT02312 --0.70 --0.65
Gate-to-Source Voltage, VGS -- V
IT02313
VGS(off) -- IDSS
Forward Transfer Admittance, yfs -- mS
1.2 1.1 1.0 0.9 0.8 0.7 0.6 0.5 0
Cutoff Voltage, VGS(off) -- V
VDS=5V VGS=0 f=1kHz
VDS=5V ID=1A
--0.60 --0.55 --0.50 --0.45 --0.40 --0.35 --0.30
100
Drain Current, IDSS -- A
200
300
400
500 IT02314 120
0
100
100
THD -- VIN
Drain Current, IDSS -- A
200
300
400
500 IT02315
PD -- Ta
Allowable Power Dissipation, PD -- mW
Total Harmonic Distortion, THD -- %
THD : VCC=4.5V f=1kHz IDSS : VDS=5.0V
10
100
150A I DSS=
350A
250A
80
60
1.0
40
20
0.1 0 50 100 150 200 IT02316
0 0 20 40 60 80 100 120 140 160
Input Voltage, VIN -- mV
Ambient Temperature, Ta -- C
IT02317
No.6612-3/5
EC3A01B
10
Ciss -- VDS
Reverse Transfer Capacitance, Crss -- pF
3
Crss -- VDS
VGS=0 f=1MHz
VGS=0 f=1MHz
Input Capacitance, Ciss -- pF
7
2
5
1.0
7
3
5
2 7 1.0 2 3 5 7 10 2 3
3 7 1.0 2 3 5 7 10 2 3
Drain-to-Source Voltage, VDS -- V
0
IT02318
GV -- IDSS
Drain-to-Source Voltage, VDS -- V
Reduced Voltage Characteristics, GVV -- dB
--0.5
GVV -- IDSS
IT02319
--1
Voltage Gain, GV -- dB
--2
GV : VCC=4.5V VIN=10mV RL=1.0k f=1kHz IDSS : VDS=5.0V
--0.7
GVV : VCC=4.5V1.5V VIN=10mV f=1kHz IDSS : VDS=5.0V
--0.9
--3
--1.1
--4
--1.3
--5
--6 --7 0 100
--1.5
--1.7 0 100
Drain Current, IDSS -- A
200
300
400
500 IT02320 32
2.5
THD -- IDSS
Drain Current, IDSS -- A
200
300
400
500 IT02321
Zi -- IDSS
Total Harmonic Distortion, THD -- %
Input Impedance, Zi -- M
2.0
THD : VCC=4.5V VIN=30mV f=1MHz IDSS : VDS=5.0V
31
Zi : VCC=4.5V VIN=10mV f=1kHz IDSS : VDS=5.0V
30
1.5
29
1.0
28
0.5
27
0 0 100
26
Drain Current, IDSS -- A
200
300
400
500 IT02322 --111
0
100
960
ZO -- IDSS
Drain Current, IDSS -- A
200
300
400
500 IT02323
VNO -- IDSS
950
Output Noise Voltage, VNO -- dB
Output Impedance, ZO --
ZO : VCC=4.5V VIN=10mV f=1kHz IDSS : VDS=5.0V
--112 --113 --114 --115 --116 --117 --118 --119
VNO : VCC=4.5V VIN=0, A Curve RL=1.0k IDSS : VDS=5.0V
940
930
920
910
900 0 100
--120
Drain Current, IDSS -- A
200
300
400
500 IT02324
0
100
Drain Current, IDSS -- A
200
300
400
500 IT02325
No.6612-4/5
EC3A01B
Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of January, 2005. Specifications and information herein are subject to change without notice.
PS No.6612-5/5

▲Up To Search▲

Price & Availability of EC3A01B

	To Download EC3A01B Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .